Please select your currency from the list below
Calculating...
All prices are provisional on exchange rates and credit card charges beyond our control |
IPA-ADT919AN
IPA-ADT919AN
https://www.homershams.co.nz/shop/Pressure/095+to+140+bar+Pneumatic+Test+Pump.html
-0.95 to 140 bar Pneumatic Test Pump |
![]() |
![]() |
![]() |
![]() Testimonials |
![]() |
![]() Articles |
Monthly Newsletter is no longer being published. check out our LinkedIn profile for updates
|
Be secure with Homersham’s |
Contact UsPh 03 358 8309Fax 03 963 2016 sales@homershams.co.nz 3 Homersham Place, Burnside Christchurch 8053 New Zealand |
Join Us |
With a long lever, it just takes 30 seconds to reach 2000 psi (140 bar).
A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 10 Pa (0.1 mbar). A specially designed shut-off valve makes the pressure as stable as possible during calibration.
A built-in gas-liquid isolator protects the pump from moisture and dirt to reduce the need for maintenance. The residual liquid in the pump introduced from devices under test will be pushed out and collected during pressure release.
Two hand-tight connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches.
The ADT919 is an ideal comparison test pump for pressure instruments calibration.
Additel 919 High Pressure Pneumatic Pump (2 min Video)