Adhesives

Permabond 2010 Cyanoacrylate (Super Glue) Fast Cure, Non drip, WRAS Approval for potable water

Permabond CSA-NF Non-flammable Cyanoacrylate Surface Activator

Permabond A1042 Anaerobic Threadlocker. Rapid Cure, Medium Strength, Can be undone with normal tools

Permabond A1042 Anaerobic Threadlocker. Rapid Cure, Medium Strength, Can be undone with normal tools.

Performix, Plastidip. Rubberised Paint 311g Aerosol Can
***DGLQ, Class 2.1 ***Hazardous for transport - please allow 3 to 5 days for delivery

Permabond A1044 Anaerobic Threadsealant. High Strength, excellent chemical resistance.

Permabond A1044 Anaerobic Threadsealant. High Strength, excellent chemical resistance.

Permabond A1046 Anaerobic Retainer, Medium viscosity, toughened, rapid cure

Permabond A1046 Anaerobic Retainer, Medium viscosity, toughened, rapid cure

A trigger device that attaches to the top of an aerosol can to make spraying easier on the hands.

Permabond A1046 Anaerobic Retainer, Medium viscosity, toughened, rapid cure

Permabond A131 Anaerobic Threadsealant. Low strength, easy to dismantle

Permabond A134 Anaerobic Retainer. High strength, High Viscosity, non drip.

Permabond A136 Anaerobic Gasketmaker.

Permabond A905 Anaerobic Activator, used to speed up the cure of Anaerobic Adhesives.

Permabond 101 Cyanoacrylate (Super Glue) Low viscosity wicking grade

Permabond 102 Cyanoacrylate (Super Glue) General Purpose, WRAS Approval for potable water

Permabond 105 Cyanoacrylate (Super Glue) For difficult rubbers, WRAS Approval for potable water

Permabond 2010 Cyanoacrylate (Super Glue) Fast Cure, Non drip, WRAS Approval for potable water

Permabond 2011 Cyanoacrylate (Super Glue) Non drip, non sag gel

Permabond 737 Cyanoacrylate (Super Glue) Black, Toughened, impact & peel resistant

Permabond ES550 Single-Part Heat Cure Epoxy Adhesive.
Cure at 150 °C for 20 min.
Cartridge fits standard single tube caulking gun.

Permabond ET500 Epoxy.
Rapid bonding for wood, most plastics, composites, concrete & metal.

Permabond MH199 High Strength, High Temperature (200 °C) Gasket Maker