Permabond 820
High Temperature Super Glue
|
| Permabond 820 is a low
viscosity, high performance adhesive, specifically designed to provide
high temperature resistance. |
|
Colour |
Colourless |
Viscosity |
100 mPa.s |
|
Handling Time |
10-30 seconds |
| Full Strength |
24 hours |
| Tensile Strength |
25-30 MPa |
| Temperature Range |
-30 to 200°C |
| Maximum Gap Fill |
0.15mm |
| Bottle Sizes Stocked in NZ |
20 g |
|
 |
|
Contact us for copies of Technical and Safety Data Sheets |
| CAUTION: Cyanoacrylate
adhesives will bond skin and eyes in seconds. Contact with
skin and eyes needs to be avoided. Use in a well ventilated
area. |
|
Directions for use:
The surfaces to be bonded should be dry, clean and free from oil
grease. The use of Permabond Cleaner A or other organic
solvents such as acetone or Methyl Ethyl Ketone (MEK) is
recommended. Persistent contamination should be removed by
abrasion prior to degreasing.
Apply the adhesive sparingly to one surface and bring the components
together quickly and in correct alignment. Squeeze the
parts together with sufficient pressure to ensure the adhesive
spreads to cover the surfaces. Do not disturb the joint until
handling strength is reached.
Product should be stored in a 'fridge but should be allowed to reach
room temperature before opening to prevent condensation causing
premature hardening.
Cure speed can be adjusted by the use of Permabond C
Surface Conditioner (CSA). |
|
|
View
all Permabond products |
