|
Terms & Conditions (pdf)
| |
Permabond C792
General Purpose Instant Adhesive
|
| Producing extremely rapid bonds
between a wide variety of materials, including plastics, rubbers, metals,
paper, card and leather, Permabond C792 is particularly suited to rapid
assembly operations involving small components. With a viscosity similar
to that of cooking oil it can easily be applied direct from the bottle or
via automated dispensing equipment where speed and/or precision is
required. |
|
Colour |
Clear |
|
Viscosity (mPa.s) |
75 |
|
Specific Gravity |
1.05 |
|
Handling Time |
1 – 7 seconds |
|
Full Strength |
24 hours |
|
Tensile Strength (MPa) |
20 |
|
Gap Fill (mm) |
0.12 |
|
Temp Range |
-30 / 85 °C |
|
Bottles Stocked in NZ |
20 g, 50 g |
|
 |
|
Contact us for copies of Technical and Safety Data Sheets |
| CAUTION: Cyanoacrylate
adhesives will bond skin and eyes in seconds. Contact with
skin and eyes needs to be avoided. Use in a well ventilated
area. |
|
Directions for use:
The surfaces to be bonded should be dry, clean and free from oil
grease. The use of Permabond Cleaner A or other organic
solvents such as acetone or Methyl Ethyl Ketone (MEK) is
recommended. Persistent contamination should be removed by
abrasion prior to degreasing.
Apply the adhesive sparingly to one surface and bring the components
together quickly and in correct alignment. Squeeze the
parts together with sufficient pressure to ensure the adhesive
spreads to cover the surfaces. Do not disturb the joint until
handling strength is reached.
Product should be stored in a 'fridge but should be allowed to reach
room temperature before opening to prevent condensation causing
premature hardening.
Cure speed can be adjusted by the use of Permabond C
Surface Conditioner (CSA). |
|
|
View
all Permabond products |
|
