Permabond 102 (was C2)

General Purpose Super Glue

Permabond 102 is the general purpose cyanoacrylate capable of bonding a wide variety of materials such as plastics, rubbers and metals.

Colour	Colourless
Viscosity (mPa.s)	100
Handling Time	10-40 seconds
Full Strength	24 hours
Tensile Strength (MPa)	25
Temperature Range	-30 to 85°C
Maximum Gap Fill	0.125mm
Bottle Size Stocked in NZ	3 g Tube

CAUTION: Cyanoacrylate adhesives will bond skin and eyes in seconds. Contact with skin and eyes needs to be avoided. Use in a well ventilated area.

Directions for use: The surfaces to be bonded should be dry, clean and free from oil grease. The use of Permabond Cleaner A or other organic solvents such as acetone or Methyl Ethyl Ketone (MEK) is recommended. Persistent contamination should be removed by abrasion prior to degreasing.
Apply the adhesive sparingly to one surface and bring the components together quickly and in correct alignment. Squeeze the parts together with sufficient pressure to ensure the adhesive spreads to cover the surfaces. Do not disturb the joint until handling strength is reached.
Product should be stored in a 'fridge but should be allowed to reach room temperature before opening to prevent condensation causing premature hardening.
Cure speed can be adjusted by the use of Permabond C Surface Conditioner (CSA).

View all Permabond products

Some files on this site require Adobe Acrobat Reader. Click the logo to the left if required.

Any queries or broken links can be directed to the webmaster via joanne@homershams.co.nz