Home  |  Company  |  Support  |  Business Login  |  Contact

Environmental & Combustion Controls


This article focuses on Environmental & Combustion Controls by Honeywell.

The Environmental & Combustion Controls division includes:
  1. Damper actuators

Damper Actuators

Dampers open and close to control the passage of gas (most often air).  They are very commonly seen in Air Handlers in central heating systems, burner fire-rate control and wood kilns.  
 

Grill 16-inch-Model-204-Damper-Ph FireDamper

Sometimes they’re used as a safety device to prevent the spread of fire.
 
The first two examples above are manually operated, but it’s common to operate them electrically by Damper Actuator Motors such as the Modutrol or Direct Coupled Actuators mounted on the shaft of the damper (see picture 3 above)
 
Homershams supply the actuators to perform this task.
 

Xmas2
Xmas3
A Modutrol Actuator A shaft-mounted, direct coupled actuator


Motorised Actuators & Valves

In the previous section we talked about controlling the flow of air or gas, but these valves control the flow of process water or steam in industrial plants and hydronic water circulating systems. The control is usually determined by an external monitoring system and can be used for diverting the water and/or mixing hot & cold water to achieve a given temperature output.

Xmas4 Xmas5
2 and 3-way 15-50 mm Models (V50xx series)
2 and 3-way 15-150 mm Models (V5x series)

Once again, these are operated by an actuator motor that is driven by a control signal from the monitoring system.
 
The operation of the valve control is linear (up and down) and is very accurate as the actuator is directly coupled to valve stem. 
Valve Valve2

As mentioned, the valve, or damper is driven by a motor controlling the flow, but the degree of opening and closing is set by Positioning Control.

Positioning control may be

  • Fixed or  On/OFF
As the name suggests, ON/OFF control is simply that.  A valve is either 100% open or 100% closed.  Sometimes ON/OFF control can overshoot/undershoot, causing poor overall system control.
  • Floating
Floating control is a variation on the On/Off theme.  Floating control requires a fast responding sensor and a slow moving actuator.  The slowed response of the actuator ‘smooths out’ the overshoot and undershoot sometime associated with ON/OFF control and can lead to a tighter system control.
  •  Modulating
Modulating controls can open to any degree required by the system e.g. 10% 18% or 75%.  Most often the actuator is sent a 4 to 20 mA signal which represents any value between 0 and 100% and can open to that extent.


Gas Detection

 
Gas detectors sense and alert people to the presence of toxic fumes, explosive gases or diminished (or elevated) oxygen. Gas detectors may be 'person-worn' or installed in-situ with alarms to alert others and log results

 
   
XCD2 E3POINT Midas-2


Thermostats

Temperature controllers can provide full proportional control of heating and cooling, but sometimes all we need is ON and OFF control and this is the job of the thermostat.
 
l4008a1015-5 tam813ge51bwhres Untitled-1 Untitled-2


Pressure Control

 
Pressure switches come in a variety of styles and approvals. DIN, TUV or DVGW approvals are required for some safety applications.  Most of these have an adjustable set point to switch contacts, usually to prevent over pressure situations.
 
honeywell l404 Fema1 fema2


Flame Safety/Combustion Control

 
Burner safety is crucial.  Loss of flame, poor burning and other faults can lead to danger and poor burner performance.  Burner controls with safety cut-outs and safety interlocks can shut down the system in the event of faults.  Additional features such as checking for fresh-air purge before ignition or loss of pilot and other safety features make for a safer system. 
 
 
7800 Purple 2


Earthquake Switches

 
Safely shut down processes in the unlikely (!!) event of an earthquake.  The switch senses the jolting and/or shock to operate a set of contacts.
V-725-Eartquake-Switch
When it's time to upgrade - contact Homershams.
Title
     Homersham’s are 100% NZ Owned and have been supporting New Zealand business for over 70 years
s1 Guarantee s1 Delivery s1 Security s1 Feedback & Testimonials s1 Technical Help

Monthly Newsletter 
 

Past Newsletters and Articles

btn register

Be secure with Homersham’s

IANZ 2014 155
btn more

Contact Us

ftr img2phn2Ph 03 358 8309
phn2Fax 03 963 2016
phn2sales@homershams.co.nz

3 Homersham Place,
Burnside
Christchurch 8053
New Zealand

Join Us

in